Printable version

Honeywell M9184C1031

Honeywell M9184C1031 24V Non-Spring Return Foot Mounted Actuator with 150 lb-in. torque. Series 90 Modutrol™ IV Motors non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves. FEATURES: Replaces M934A,D, M941, M944A,C,D, M945A,D,F, M954, M965, and M975 motors; Integral junction box provides NEMA 3 weather Protection; Integral spring return returns motor to normal position when power is interrupted; Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer; Quick-connect terminals are standard—screw terminal adapter is available; Adapter bracket for matching shaft height of older motors is available; Motors have field adjustable stroke (90° to 160°). • Die-cast aluminum housing; Integral auxiliary switches are available factory mounted, or can be field added; Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Other timings available; Spring return motors can operate valve linkages form power end or auxiliary end shafts for normally closed or normally open valve applications; All models have dual shafts (slotted and tapped on both ends); All models have auxiliary switch cams; Fixed torque throughout the entire voltage range. • Motors are designed for either normally open or normally closed valves and dampers; Field addable interface modules can be mounted in the junction box to upgrade the motor to Series 70 (electronic) control. VIEW SPECIFICATIONS