Printable version

Bestsellers

1. Fireye MC120
2. Fireye E110
3. Fireye ED510
4. Fireye 48PT2-1007
5. Fireye MEP100

Special

Gift certificates

Help

Moyer Instruments, Inc. :: Fireye :: Fireye EP260

Fireye EP260

Fireye EP260 Programmer Module. The Fireye EP260, EP270 (early spark termination), or EP265 (pilot stabilization) programmer modules are used with the FLAME-MONITOR Burner Management Control System (P/N E110). Several operational characteristics of the programmer (with Engineering code 28 or later, e.g. 9414-28) are determined by six (6) dipswitches located on the side of the programmer. These characteristics include extended purge timing (dipswitches 3, 4, 5), and the option requiring the 3-P running interlock circuit to be proven open at the start of the operating cycle (dipswitch 6). Dipswitches 1 and 2 are inactive. The EP260, EP265, EP270 programmers provide start-up programming, safe-start check, and flame monitoring supervision. They insure proof of low fire position, and fuel valve end switch safety checks. The control is designed to initiate a safety lockout if any of these circuits are open at the improper point in the control cycle. A running interlock circuit on the FLAME-MONITOR system constantly monitors the limit switches, air flow switches, and fuel pressure switches through the programmer. The programmer will recycle if the running interlock circuit (3-P) is opened during the firing cycle. The programmer module will de-energize all fuel valve circuits within four (4) seconds (max.) following a flame failure [two (2) seconds for the EP265], or at the end of the pilot trial for ignition period if no flame is detected. An alarm circuit will be energized following a safety lockout. The programmer module includes an RJ45 style connector to interface with an integral or remote alpha-numeric display (P/N ED510). It includes two (2) additional RJ style connectors to connect to an E500 Communication Interface in a multi-drop configuration. The programmer will also communicate with the E500 via the standard ED550 cables to provide backward compatibility. All EP programmers come equipped with built-in modbus-rtu communications. Refer to bulletin E-1101 for complete details. The programmer is the heart of the FLAME-MONITOR System and features a plug-in design for ease of installation. It is micro-processor based and stores burner cycles, burner hours, system hours, and lockout history (with burner cycle and burner hour time stamp) which are accessible via the ED510 alpha-numeric display, E500 Communication Interface or Modbus Communications. If replaced, the new programmer card will begin accumulating a new history. Specify ED510 display separately. Refer to Bulletin E-1101 for detailed information on the FLAME-MONITOR System. VIEW SPECIFICATIONS

Details


SKU	SKU328
Weight	1.00 lbs
Price:	$567.00

Options


Quantity
If you see this message it means that your browser doesn't support Javascript or it is disabled. Please enable JavaScript in your browser settings for the proper functionality of X-Cart.

Send to friend

Recommends list

Customers who bought this product also bought the following products:

Your cart

	Cart is empty

View cart
Checkout
Wish list
Orders history

Authentication

News

No news available at the moment